Linksys Extender Setup

How to Reset a Linksys Range Extender

Linksys Range Extender

A progressive way to enhance your WiFi signal at home or workplace is by utilizing a Linksys Range Extender setup. The functioning of a Linksys extender setup provides high-speed internet access even in the underground laboratory that was built beneath your house. Furthermore, these extenders can cover up to 2000 to 7000 square feet of area. It establishes a connection to your current WiFi network before duplicating and retransmitting it. This increases the signal’s range so that it can cover more area. Moreover, Linksys range extenders are already consumer favorites.  

The extender functions seamlessly, but there can be hiccups in how you use it. Furthermore, if you’re a long-time user, then some not-so-common issues might have happened. Some solutions are listed below to troubleshoot any unforeseen problem. The most common way to deal with them is to reset the extender setup. However, there is more to it. 

In order to fix all of its issues and restore it to its factory settings, the following are steps for resetting the Linksys extender setup

Linksys Extender Issues

The following are some of the most common issues that you can be having with your extender:

  • You may be having login problems or trouble configuring the Linksys extender.
  • You might not be able to visit extender.linksys.com, and your network might not be able to either.
  • While attempting to connect several devices to your extender, it can exhibit specific issues.
  • Your Linksys router may not be able to be configured properly, and you may be unable to set it up.
  • The extender may prevent you from configuring the router.
  • Your router’s password might have slipped your mind.
  • It’s possible that you’re having trouble getting to your router’s setup page.
  • Even though you are connected to the extender, you might not be able to access the internet.

 

A reset of the Linksys range extender can help with all these issues. If you are experiencing any of these issues and the troubleshooting techniques are simply ineffective, follow the below reset instructions. So let’s examine the detailed process for performing a Linksys extender reset.

Procedure to Reset Linksys Range Extender Setup

Reset Linksys Range Extender Setup

With the Linksys extender setup, you can utilize both wired and wireless devices, including laptops, wireless routers, desktops, and other wirelessly compatible gadgets. Linksys extenders increase your current WiFi router’s wireless network and internet connection range. You can also restore your Linksys Smart WiFi range extender to factory default settings. This will solve all the malfunctioning problems that you are experiencing.

Restoring the Linksys WiFi extender to its original factory settings is simple. You can reset the Linksys extender setup procedure in a matter of seconds. Let’s examine the process for resetting a Linksys extension. Additionally, you get two different ways to perform the reset. 

  • Hard Reset 
  • Soft Reset

Instructions to Reset Linksys WiFi Extender Setup via Hard Reset

  • First, switch off all attached devices. Further, detach all the devices.  
  • Now, connect a power cable to allow your Linksys range extender to start up properly.
  • Next, wait for a few minutes for all the LEDs to become stable.
  • Hard reset requires a pin or paperclip with a pin-pointed tip.
  • On the Linksys extender, there is a reset hole. Thus, insert a pin or paperclip in the reset hole and hold it there for a short while.
  • When all the LEDs blink again, release the pin and pull it out of the hole.
  • Finally, you can now configure the router for a new Linksys setup. 
Instructions for Soft Reset of Linksys Extender:
  • Turn on your laptop or computer.
  • Open one of your preferred, most recent web browsers to access the Linksys extender setup page on your desktop or laptop.
  • To achieve this, join your desktop computer or laptop to the Linksys WiFi range extender with an ethernet cable.
  • Type extender.linksys.com into your web browser’s address bar and press the enter key.
  • Enter the Linksys extender’s default login information on the setting screen for the Linksys wireless extender.
  • Go to the “Administration field” to reset your Linksys extender.
  • It is necessary to press the factory default reset button.

 

Previous Article –  How to Perform Linksys RE6800 Setup

Tags

Recent Comments

No comments to show.

Categories